June 4, 2020

digmydog-Design

Anything but ordinary

How To Build a Sliding Barn Door Entertainment Center For Your Man Cave

four – 2×3 @ 84″ four – 2×3 @ 17″ four – 2×3 @ 14″...

  • four – 2×3 @ 84″
  • four – 2×3 @ 17″
  • four – 2×3 @ 14″

Sides

  • 2 – 3/4″ thick plywood cut 36″ x 17-one/4″

Experience Body

  • 5 – 1×4 @ 36″
  • 8 – 1×4 @ 17-3/4″

Shelves

  • 2 – 1×8 @ 87″
  • 2 – 1×10 @ 87″

Center Shelf Supports and Cleats

  • 5 – 1×2 @ 14″
  • 5 – 1×2 @ 17″

Base Trim

  • one – 2×3 @ 90″
  • 2 – 2×3 @ 18-3/4″

Best

Doorways

  • 2- one/4″ thick plywood cut 20″ x 30″
  • four- 1×3 @ 30″
  • 2- 1×3 @ 15″
  • one- 1×3 @ 29 one/4″ from corner to corner cut at an angle of 28 degrees

How To Construct A Sliding Barn Doorway Amusement Center:  The Method

Stage one)  Build The Body

The frames are pretty self-explanatory but I have integrated a concluded photograph as perfectly as a in depth diagram.  I built 3 individual consoles so that is why you see  6 of these frames.

How To Build A Sliding Barn Door Console For Your Man Cave by Diva of DIY on Remodelaholic

Stage 2)  Add The Sides

Build A Sliding Barn Door Entertainment Center For Your Man Cave from Diva of DIY on Remodelaholic

Attach the 3/4″ plywood by initially applying a bead of wooden glue all over the edge of the plywood and safe working with 2 one/2″ screws.  Repeat with every part.

Stage 3)  Attach to the wall.

DIY Man Cave Ideas: Barn Door entertainment console to store all the TV equipment by Diva of DIY on Remodelaholic.

I apologize but I forgot to get a photograph of the frame set up prior to experience frame, shelves and cleats ended up set up but I have integrated a diagram under to give you the measurements.

I set up tongue and groove automobile-siding for texture which displays as a result of the open back facet.  Another good thought would be to paint a contrasting paint coloration or incorporate a fun wallpaper on the wall behind the console.

Stage four)  Add The Experience Body

How to build a barn door entertainment center by Diva of DIY on Remodelaholic

Stage 5)  Add cleats and shelves

Sliding Barn Door Cleats for farmhouse entertainment center build by Diva of DIY on Remodelaholic.

Stage 6)  Add top rated boards.

Do not connect at this place mainly because it will make it additional hard to paint or stain them.

Stage seven)  Stain or paint frame and top rated

Body and doors:  Sherwin Williams SW Iron Ore (similar coloration that Cassity employed right here!)

Best (Pine):  Custom Minwax stain coloration blend of  50/fifty Vintage Grey/Jacobean

Stage 8)  Make Doorways

You could also make standard shaker cupboard doors subsequent this tutorial right here. 

How To Build A Sliding Barn Door Console by Diva of DIY on Remodelaholic

 

Build a farmhouse entertainment center by Diva of DIY on Remodelaholic

Rip plywood to 20″ x 30″ panels (or dimension of opening).  With nail gun, connect the two 30″ trim boards to the plywood panel.

Plans for DIY sliding barn door entertainment center from Diva of DIY on Remodelaholic

Double test your measurement and cut the remaining trim boards to finish the door panel.  Attach with nail gun.

How to build a farmhouse entertainment center by Diva of DIY on Remodelaholic

To build the diagonal style and design displayed on my leisure center, your board will be 29 one/4″ prolonged from corner to corner with an angle of 28 degrees.  Again, connect with nail gun.

How To Build A Sliding Barn Door Console For Your Man Cave by Diva of DIY on Remodelaholic

Stain or paint doors (or both equally!).  I painted mine Sherwin Williams Iron Ore to match the frame. (This is the similar coloration Cassity painted her inside doors and colorwashed her barn door right here to incorporate coloration though nevertheless exhibiting the wooden grain.)

Stage 9)  Hang Doorways

How To Build A Sliding Barn Door entertainment console For Your Man Cave by DIva of DIY on Remodelaholic

I adopted the instructions integrated with my sliding door components. See our Remodelaholic picks for finances-helpful sliding door components right here.

Stage ten)  Attach top rated boards to the frame

How To Build A Sliding Barn Door Console For Your Man Cave by Diva of DIY on Remodelaholic

That is it!  Not as well lousy for an total sliding barn door leisure center, correct?  Now it is time for the fun part…the add-ons.

How To Build A Sliding Barn Door Console For Your Man Cave 21

I chose chunky baskets, previous trunks and steel containers to accessorize our guy cave opening shelving.  They incorporate excess storage though trying to keep a masculine experience.

 

How To Build A Sliding Barn Door Console For An Entertainment Center Or Media Room | Farmhouse style | DIY barn doors

I am so satisfied with the way my sliding barn door leisure center turned out.  All of the video game devices and cable packing containers are hidden driving the barn doors when not in use, but the doors easily slide open to give access when required.  The excess storage is perfect for all of the PS4/XBox games and our DVDs and I even have a basket for distant controls. Existence is very good for all of us!

Each individual and just about every a person of you inspire me and I Enjoy to see the do the job that you’ve established. Feel absolutely free to share with me on Instagram, Twitter or Fb. And as often, be sure to stick to Diva Of Do-it-yourself on Pinterest and signal up for our No cost Publication to obtain the most recent initiatives shipped straight to your inbox!  – Leanne


And stick to together with Remodelaholic, as well, on YouTube, Instagram, Fb, and Pinterest.

More from Remodelaholic:

Do-it-yourself and finances-helpful sliding barn door components

how to construct a farmhouse console

how to construct a double X console table

how to easily and inexpensively stain wooden any coloration

how to construct a split Dutch barn door

Initially revealed 08.26.2017 // Current 03.twenty five.2020